INSTEON 2843-222 User Manual

INSTEON Open/Close Sensor 2843-222Quick Start Guide

INSTEON Open/Close SensorMagnetSet Button(Cover Removed)Status LEDAA Battery (Included)Set Button

Sensor Placement1Peel o the tape backing and mount the sensor and magnet to a window or door.

2Position the sensor so that the arrows on the magnet and sensor enclosure align and are no more than ½” apart.1 2Up to ½”

1Follow the on-screen instructions to add your Open/Close Sensor to the INSTEON Hub.Linking to the Hub+If not using the Hub, refer to the instructions

2When prompted, press and hold the Open/Close Sensor’s set button until the status LED begins blinking. NEWXTap the set button. The status LED will do

Congure AlertsTo receive email and text message alerts when motion is detected, switch on alerts from device settings within the INSTEON app.!

RAW-1298 Rev 03.13.14Protected under U.S. and foreign patents (see www.insteon.com/patents)©2014 INSTEONMANUALLearn MoreFor the complete Owner’s Manu