Insteon SwitchLinc Dimmer (Dual-Band) - (2477D) Quick Star User Manual

INSTEON Dimmer Switch 2477D, 2477DHQuick Start Guide

6Test your Dimmer Switch by tapping the paddle to turn On and O. Press and hold to dim or brighten.Installation complete. You can now link your Dimme

Follow the on-screen instructions to add your Dimmer Switch to the INSTEON Hub.Linking to the Hub+When prompted, press and hold the Dimmer Switch’s se

Dimmer SwitchDim, brighten, set schedules and create scenes for your Dimmer Switch using the INSTEON Hub and App.Device ControlRAW-1290 Rev 03.13.14P

INSTEON Dimmer SwitchSet ButtonHeat Sink Tab(1000W Only)OHold to DimOnHold to BrightenBrightness LEDsStatus LEDFor the complete Owner’s Manual and mo

Phillips ScrewdriverTools Needed for InstallationWire Cutter / StripperVoltage DetectorFlathead ScrewdriverDisconnect PowerAlways disconnect power bef

Installation1ONONONONONONONOFFON ONTurn o power to your switch at the electrical service panel.Circuit BreakersPower is ON Power is OFFFuse Panelor

2Remove the old switch and disconnect the wires. If your box lacks neutral wires, stop and contact support.Neutral Wire½” 12mm1 2!

3Turn on power at the circuit breaker and use a voltage detector or multi-meter to identify line and load. Line will be energized.

4Turn o power at the circuit breaker. Connect the Dimmer Switch wires to the identied wires in the junction box. Verify that the wire nuts are secur

Turn o power at the circuit breaker. Connect the Dimmer Switch wires to the identied wires in the junction box. Verify that the wire nuts are secure

5Mount the Dimmer Switch into the junction box with the LED bar on the left and turn power on to the switch at the circuit breaker panel.